Lightning 6 Specifications
Mechanical |
|
|---|---|
| Boom | 30 ft. x 2 in. Diameter Aluminum |
| Spreader Brackets | 6061 Heavy Wall Aluminum |
| Spreaders | Rugged Fiberglass, 13'7" Longest Spreader Length |
| Elements | Enamel Protected Copper Wire |
| Fasteners | Plated For Corrosion Resistance |
| Wind Area | 7.4 Sq. Ft. |
| Turning Radius | 16'5" |
| Wind Survival | 100 Mph |
| Weight | 37 Lbs. |
Electrical |
|
|---|---|
| Frequency Range | 26.965Mhz - 28.870Mhz |
| Gain | 17.4 dBi |
| Front-to-Back Ratio | 44 dB |
| Front-to-Side Ratio | 50 dB |
| VSWR | 1.4:1 |
| Vertical-Horizontal Isolation | 30 dB |
| Transmission Line Required | 50 Ohm Coaxial (2 Required) |
| Power Handling Capability | 8 KW |
Lightning
6
The Lightning 6 is a 6 element directional base station antenna. The Lightning 6 takes all of the benefits of Signal Engineering's full wave design - and takes performance figures to the maximum with six elements on a wide spaced design! If you desire the performance of our Lightning 6 but space or budget is a problem now, check out the Lightning 4+ - our 4 element beam that you can easily upgrade to 6 elements (making it a Lightning 6) whenever the time is right with our upgrade kit!
The Lightning 6 is a optimized directional quad antenna incorporating all of the most desirable features for superior two-way communications. Six heavy copper wire radiating elements are precisely spaced and mounted on a rugged aluminum and fiberglass frame, forming a high-gain parasitic antenna. Exclusive SFS (Signal Feed System, patented) matching system gives maximum directional performance and dual polarity to allow switching between close (local) and long haul signal paths (DX).
Click here to compare SIGNAL ENGINEERING Beams Vs. Conventional Beams
SIGNAL ENGINEERING
1172 Aster Ave. #E
Sunnyvale, CA 94086
Telephone (408) 247-2300
Toll free Message Center 1-800-761-9409
Email Us: info@signalengineering.com
All Content Copyright 1999, Signal Engineering
